Thread fitting and sealing

 

 

Pre-applied adhesives. These products are applied to threads and are dry to touch. They activate when used.

4

Area specialising in the application of products to ensure that screw-on parts fit properly and are watertight. These products are pre-applied adhesives. They are applied to the threads, are dry to touch and activate when the parts are used.

Adhesive Type

They are pre-applied adhesives. That is, they are products which are applied to threads, are dry to touch and which activate on assembly.

Sealants

The main characteristic of these products is their ability to guarantee watertightness although they are also often used for pre-assembly as a result of their role in weak retention.

The following standards are adhered to: 3902010 function E or GM 99885490.


The main products of this type are: Precote 4, Precote 5, Precote 9, Scotch-Grip 4291.
The following standards are adhered to: 3902010 function E or GM 99885490.
The main products of this type are: Precote 4, Precote 5, Precote 9, Scotch-Grip 4291.

Fastener Adhesives

s well as serving as sealants, these products have an important micro-encapsulated adhesive which is released when the part is used and, as a result, a chemical seal is formed.

The following standards are adhered to: 3902010 function LS, DIN 267-27, WX 200, Porsche 1230, STD 1627, DBL 8830.10, etc.


The main products of this type are: Precote 80, Precote 85, Scotch-Grip 2353, Scotch-Grip 2510.

Polyamides

S Polyamide 11-based products. Their main feature is that they generate mechanical clamping between male and female threads. They are reusable products which retain their locking capacity even when used and re-used several times. They can be used as a patch or 360º coating.

They comply with standards such as DIN 267-28, 3902010 LF, WA 970 and GM6189P.


The main products of this type are: Precote 10-1, Nylon Patch

Advantages

 

  • Cost cutting due to series application..
  • Elimination of mechanical elements such as nuts, washers, etc.
  • Constant assembly values.
  • Avoids corrosion in threads.
  • Properties are maintained over time.
  • Potential safety and hygiene issues resulting from the use of liquid adhesives are avoided
  • Applicable to any type of material and treatment.
  • High safety level in dynamic stresses.
  • Highly reliable, even when exposed to variations in temperature.
  • Excellent chemical resistance.

Manufacturing facilities

 


With its headquarters in Spain, MEK has extended its international activity and capacity to respond to all its customers’ needs

Tecno-Talde

 

Pol. Ind. Goitondo Goikoa,Parcela 7,
48269 Mallabia – Bizkaia – Spain
T +34 943 176 000